An error occurred
Welcome back Anonymous. Some items from your previous shopping cart have been restored to your current shopping cart.
2-Wire Powered Loop
Commercial Type No.: B201 | Product No.: F.01U.323.798
- Suitable for use with 2-wire smoke detectors and burglary devices
- Supports up to 20 compatible smoke detectors
- Resets latching devices from the control panel
- Connects to the control panel terminal block with easy-to-install integrated pins
250 in stock
Accessory mounting bracket for enclosure
Commercial Type No.: D137 | Product No.: F.01U.020.521
- Mount accessory modules in B8103, D8103, D8108A, and D8109 enclosures.
250 in stock
Attack resistant enclosure, large
Commercial Type No.: D8108A | Product No.: 4.998.125.920
- 18 gauge cold-rolled steel enclosure
- UL Listed for Central Station Fire, Local Fire, and Remote Station Fire applications
250 in stock
Aux. power supply, SDI2 extender
Commercial Type No.: B532 | Product No.: F.01U.421.380
- Provides 12V, 2A standby and alarm current combined for Commercial. Provides 12V, 2A standby + 2A alarm current for Commercial Burglary
- Supervises two 12 V 7-18 Ah batteries independently for up to 36 Ah of capacity
- Provides up to 80 hours of standby time
- Two configurable 3A relay outputs
- Extends SDI2 bus up to 1000 feet
250 in stock
Auxiliary relay module, 12/24VDC
Commercial Type No.: D130 | Product No.: 4.998.125.828
- 12Â VDC or 24Â VDC relay
- Allows switching of current or voltage
- Two non-latching Form C dry contact outputs
- Red LED shows coil is energized
- Mounts in control panel enclosure
250 in stock
Battery, 12V 18Ah
Commercial Type No.: D1218 | Product No.: 4.998.125.820
- 12Â VDC 18Â Ah sealed lead-acid
- Fully rechargeable
- Maintenance‑free
- For use as secondary power for accessory modules
- Long service life
250 in stock
Battery, 12V 7Ah
Commercial Type No.: D126 | Product No.: 4.998.125.825
- 12 VDC sealed lead‑acid
- Fully rechargeable
- Maintenance‑free
- For use as secondary power source
- Long service life
250 in stock
Dual battery harness
Commercial Type No.: D122 | Product No.: 4.998.800.378
- Used for batteries in parallel
- Slide-on connectors
- Built-in circuit breaker protection
250 in stock
Dual battery harness, long
Commercial Type No.: D122L | Product No.: 4.998.140.606
- Used for batteries in parallel in a separate enclosure
- Slide-on connectors
- Built-in circuit breaker protection
250 in stock
Dual relay module for 2A at 30VDC
Commercial Type No.: D134 | Product No.: 4.998.800.177
- Provides two Form C dry contacts, each rated for 2 A at 30 VDC
250 in stock
Dual tamper switch
Commercial Type No.: ICP-EZTS | Product No.: F.01U.217.038
- Combination tamper switch senses when the opens and if removed from the wall
- Includes a wire loop that can accommodate additional tamper outputs
250 in stock
Earth ground clamp
Commercial Type No.: D167 | Product No.: F.01U.020.528
- Clamp for earth ground
- Diameter range of 1.3 - 2.5 cm (0.5 - 1 in.)
250 in stock
Enclosure lock and key set
Commercial Type No.: D101 | Product No.: 4.998.800.200
- Lock and key set fits Bosch enclosures
250 in stock
Enclosure, medium, red
Commercial Type No.: B10R | Product No.: F.01U.309.510
- Easy to install standoff locations for mounting supporting modules
- Made with cold-rolled steel with a red matte finish for fire applications
- Easy access mounting locations for optional transformers
- Punch outs for optional B46 External Annunciator (for B465 only)
250 in stock
Enclosure, medium, red, 16.5VAC 40VA
Commercial Type No.: B10R-1640-120WI | Product No.: F.01U.315.481
- 16.5 VAC 40 VA transformer
- Easy to install standoff locations for mounting supporting modules
- Red matte finish for fire applications
- Punch outs for optional B46 External Annunciator (for B465 only)
- Additional slow-blow fuse included in fuse block
250 in stock
Enclosure, small, red
Commercial Type No.: B11R | Product No.: F.01U.309.511
- Easy to install standoff locations for mounting supporting modules
- Made with cold-rolled steel with a red matte finish for fire applications
- Easy access mounting locations for optional transformers
250 in stock
Ethernet Communication Module
Commercial Type No.: B426 | Product No.: F.01U.414.222
- Full two-way IP event reporting with remote control panel programming support
- 10/100 Base-T Ethernet communication for IPv6 and IPv4 networks
- NIST-FIPS197 Certified for 128-bit to 256-bit AES Encrypted Line Security
- Plug and Play installation, including UPnP service to enable remote programming behind firewalls
- Advanced configuration by browser, RPS, or A-Link
250 in stock
POPEX
Expansion module, SDI2
Commercial Type No.: B299 | Product No.: F.01U.385.673
- Provides point identification for up to 100 connected addressable initiating devices using POPITs
- Supervises wiring to devices for circuit integrity
- Expands the number of points in the system
- Compact size
- Interconnect wiring connectors for easy installation
250 in stock
Expansion module, SDI2, 8-input
Commercial Type No.: B208 | Product No.: F.01U.397.024
- Programmable input point functions
- Easy to read switch addressing
- 2 interconnect wiring connectors
- Provides eight points
250 in stock
Expansion module, SDI2, 8-output
Commercial Type No.: B308 | Product No.: F.01U.397.025
- Programmable output functions
- Easy to read switch addressing
- Provides eight Form C relays
- 1Â A at 5-24Â VDC relay contact rating
- Allows remote control of outputs
- Quick modular interconnect wiring connector
250 in stock
Fire enclosure, 16x16x3.5", red
Commercial Type No.: D8109 | Product No.: 4.998.800.205
- UL Listed for residential and commercial fire and burglary alarm applications
- Comes with lock and key set
- Easy to mount
250 in stock
Inovonics SDI2 bus interface
Commercial Type No.: B820 | Product No.: F.01U.383.287
- Provides connectivity to Inovonics EchoStream EN4200 Serial Receiver
- May be installed up to 1000 ft from the control panel, allowing for optimal wireless reception
- Capacity to store any combination of point and keyfob ID’s for a total of 350 wireless devices (combined types) and up to 8 repeater ID’s
- Mounts directly inside the EN4200 Receiver housing, no separate enclosure required
- UL and CSFM Listed
250 in stock
DS7000
Input module, single-zone
Commercial Type No.: DS7461I | Product No.: 4.998.113.232
- Supervises one power-limited protection loop
- Can be used in UL Listed fire and security applications
- DIP switch programmable
250 in stock
Keypad surface mount box
Commercial Type No.: B56 | Product No.: F.01U.295.834
- Protects keypad wiring for installations using conduit
- Includes an integrated bubble level for easy installation
- Front cover mounting of keypad for easy installation of the keypad
250 in stock
G Series
Large Universal Enclosure, White
Commercial Type No.: B18 | Product No.: F.01U.363.634
- Easy-to-install on a number of different surface materials with a removable cover for ease of installation
- Enough space to protect control panel and up to 2 D1218 batteries
- Attack-resistant cold-rolled steel provides for ultimate protection against theft and property damage
- Includes cover and wall tamper
- Built in module mounting locations
250 in stock
Lock with 2 keys, short body
Commercial Type No.: D101F | Product No.: 4.998.155.082
- Die cast body
- Zinc –plated steel cam
- Comes with 2 keys (D102F)
250 in stock
Low battery disconnect module
Commercial Type No.: D135A | Product No.: 4.998.125.829
- Disconnects a B6512/B5512/B4512/B3512 from the battery when the battery level drops to 9.5 VDC
- Required for use with compatible control panels for CAN/ULC S559
- Quick and easy installation
250 in stock
G Series
Module Enclosure Small, White
Commercial Type No.: B03 | Product No.: F.01U.363.635
- Compatible with Bosch 3-hole mounting modules
- Includes enclosure tamper switch
250 in stock
Mounting plate for D8103 enclosure
Commercial Type No.: B12 | Product No.: F.01U.260.846
- Easy-to-install standoff locations for mounting supported modules
- Supports B Series control panels in larger enclosures such as the D8103
250 in stock
Notification appliance module
Commercial Type No.: D192G | Product No.: 4.998.133.000
- Supervises 12Â VDC or 24Â VDC notification appliance circuits (NACs)
- Supervised signal silencing switch
- Notification appliance circuit rated at 3.0Â A
- Multiple module configurations
- Mounts in panel enclosure
250 in stock
Plug-in Communicator, Telephone
Commercial Type No.: B430 | Product No.: F.01U.414.206
- Provides a single telephone line with RJ-45 connection for central station reporting and remote programming
- Easily configured for communications from Remote Programming Software (RPS) or a keypad, eliminating the need for separate configuration
- Easy two-step plug-in installation, troubleshooting, and maintenance
250 in stock
Powered loop interface
Commercial Type No.: D125B | Product No.: 4.998.800.203
- Two separate powered detector loops
- Suitable for 12 VDC or 24 VDC, two‑wire or four‑wire detectors
- Up to 50 two‑wire 12 VDC glass break detectors
- Reports individual loop alarm, individual loop trouble, and ground fault
- Manually resets latching devices from control panel or remote central station
250 in stock
RPS
Programming modem, 2400 baud
Commercial Type No.: MODEM-KIT-2400B | Product No.: 4.998.800.210
- For programming communications
250 in stock
Relay module, form C, 10A 12/24V
Commercial Type No.: PAM-4 | Product No.: F.01U.135.043
- One single pole, double throw (SPDT) dry contact Form C relay
- Wide voltage range from 9Â VDC to 40Â VDC
- Input voltages polarity‑sensitive and diode‑protected
- Current constant across the operating range
250 in stock
DS7000
Single Multiplex driver
Commercial Type No.: DS7430 | Product No.: 4.998.800.008
- Provides a two-wire multiplex bus for DS7400Xi Control Panels.
250 in stock
Steel enclosure, medium, white
Commercial Type No.: B10 | Product No.: F.01U.268.495
- Easy-to-install standoff location for mounting supported modules
- Made with cold-rolled steel with a white semi-gloss finish
- Easy access locations for battery placement
- Optional tamper switch mounting location
250 in stock
Steel enclosure, small, white
Commercial Type No.: B11 | Product No.: F.01U.262.005
- Easy to install standoff location for mounting supporting modules
- Made with cold-rolled steel with a white matte finish
- Easy access locations for battery placement
- Optional taper switch mounting location
250 in stock
Supervision module, battery lead
Commercial Type No.: D113 | Product No.: 4.998.125.818
- Works with 12Â V nominal systems
- Meets NFPA 72 requirements for battery lead supervision for fire alarm control panels (FACPs)
250 in stock
Transformer enclosure kit, grey
Commercial Type No.: D8004 | Product No.: 4.998.140.404
- Separates high and low voltage within the enclosure
- Comes with a duplex grounded receptacle
- Easy wiring and mounting
250 in stock
Transformer plug-in, 16V 40VA
Commercial Type No.: D1640 | Product No.: 4.998.125.832
- System transformer rated at 16.5Â VAC, 40Â VA
- Suitable for use on approved UL applications in the USA
250 in stock
Transformer plug-in, 18V 50VA
Commercial Type No.: TR1850 | Product No.: 4.998.126.576
- Provides efficient, constant power for compatible products
250 in stock
Transformer, plug-in, 18V 22VA
Commercial Type No.: CX4010 | Product No.: F.01U.020.504
- Provides efficient, constant power for compatible control panels and modules
250 in stock
Transformer, plug-in, 18V 22VA, Canada
Commercial Type No.: ICP-TR1822-CAN | Product No.: F.01U.005.574
- Provides efficient, constant power for compatible modules
250 in stock
Trim plate for keypad
Commercial Type No.: B96 | Product No.: F.01U.272.856
- Cover the wall footprint of previous keypads when replacing them with slimmer keypads
250 in stock
Universal enclosure, white
Commercial Type No.: B8103 | Product No.: F.01U.300.149
- Easy-to-install standoff location for mounting supported modules
- Made with cold-rolled steel with a white semi-gloss finish
- Easy access locations for battery placement
- Optional tamper switch mounting location
250 in stock
USB direct connect cable
Commercial Type No.: B99 | Product No.: F.01U.278.853
- Allows programming on-site without an Ethernet cable or interface module
250 in stock
ZONEX retrofit module
Commercial Type No.: B600 | Product No.: F.01U.383.383
- 3-hole mounting footprint and compact size allow for easy installation
- Provides legacy ZONEX input/output support
- Compact size
- Includes two ZONEX busses allowing for continued ZONEX support on a compatible control panel
250 in stock
Auxiliary power supply module, 2A 12V
Commercial Type No.: B520 | Product No.: F.01U.172.941
- Provides up to 2 A of 12 V standby current for Fire or Burglar Applications (4 A of Burglary alarm current)
- Supervises up to two 12 V 7-18 Ah batteries independently for up to 36 Ah of capacity
- Provides up to 80 hours of standby time
- Easy-to-read switch addressing
- Uses the Bosch standard TR1850 plug-in transformer
250 in stock
Battery, 12V 2.2Ah
Commercial Type No.: D1222 | Product No.: 4.998.125.821
- 12 VDC sealed lead‑acid
- Fully rechargeable
- Maintenance‑free
- Long service life
- Appropriate for use as uninterruptible power supplies
250 in stock
Added to Your Shopping Cart